DROP TEST & INSERTION FORCE FIXTURES
Pipeline Design & Engineering created a test fixture to measure the unconstrained insertion force on a surgical device connector, and another fixture to measure the effects of impact at various connector orientations.
Mechanical Engineer, Machinist, Assembly Technician
Solidworks 3D CAD
- Connector must be constrained rotationally and translationally (to apply force) about the center axis.
- The connector must have an adjustable amount of ‘auto-centering’ force.
- The base of the fixture must be free to translate and rotate along the ground plane with minimal friction.
- A key and swivel cam combo is necessary to test locked vs unlocked state of the connection
- Fixture must have seamless integration with the current load cell and Instron Machine
- Connector Must be constrained in three separate & interchangeable orientations
- The connector must be held in place until fully accelerated at which point it should be released from the track to impact the surface below.
- The drop speed, drop height, and normal-axis-impact-angle must be adjustable
SUMMARY OF ACTIVITIES
The customer needs to validate the cyclic functionality of a surgical device connector after manufacturing and post-handling treatments. Current fixture capabilities are too constrained for OTC hardware and custom hardware must be designed in order to obtain repeatable and reliable data.
Pipeline used collaborative “Master Modeling” and motion-enabled solid modeling techniques to design, review, and ultimately define this complex yet user-friendly solution. Following design, the fixture was rapidly manufacturing via a team of CNC specialists and over-the-counter hardware sources. The fixture was assembled and delivered to the customer within an industry standard ‘short lead time’, enabling the customer to meet scheduled deadlines.
The customer needed to repeatedly test and validate the effects of impact on connector functionality at a standardized set of dynamic conditions. Specific care was taken to create a safe and user-friendly environment from which to create and gather aforementioned validation data.
Pipeline used a wide range of OTC hardware and solid models to design, review, and ultimately define this system. Following design, the fixture was rapidly manufacturing via a team of CNC specialists and over-the-counter hardware sources. The fixture was assembled and delivered to the customer within an industry standard ‘short lead time,’ enabling the customer to meet scheduled deadlines and take steps towards product goals.
Need some Test
Pipeline Design & Engineering provides product development services to established product companies, startups, inventors, and any other groups with design & engineering needs. Please contact us today and let’s get started!